|
Precision Parts Cleaning Specialists
Extreme Cleanliness for Critical Applications
|
Welcome to Clean
Parts Group, a division of Acorn
Industries. Our precision parts
cleaning, testing, and packaging
services meet the exacting standards of
many companies worldwide that require
high levels of cleanliness in certain
applications. Production runs and small
lots are given the same high quality
service and attention. We clean a vast
variety of parts that come in many
different shapes and sizes ranging from
gaskets, filters, O rings and syringes
that are less than a centimeter in
length, to flow sensors, pressure
vessels, and satellite assemblies more
than 10 feet long. |
Types of Cleaning Services
Available:
- Fine Particle Removal from Hydraulic Tubes, Parts, and Systems
- Fine Particle Removal to Military, Government, and Corporation Specifications
- Solvent Cleaning Services
-
Cleaning for Oxygen Service for the removal of combustible contaminants
-
Special Gas Cleaning Services
-
Specialty Chemical Cleaning
|
- Part Sterilization Services
- Silicone Cleaning Services
- Passivation (Nitric & Citric)
- Cleaning Airless/Vacuum Vapor Degreasing
- Aqueous and Semi-Aqueous Cleaning
- Ultrasonic Cleaning Services
- Cleanroom Packaging of Cleaned Items
- Testing and Evaluation of Items for Cleaning
|
Some of the 1,000 different specifications that we clean to.
Types of
Parts Cleaned:
|
|
-
Hydraulic
Assemblies
-
Idler Gearshafts
-
Machined Parts
-
Manifolds
-
Medical Implants
-
Medical
Components
-
Military Parts
-
Motor Pinions
-
Nozzles
-
O Rings
-
Overcutters
-
Pipe
-
Plastic Parts
-
Pneumatic
Assemblies
-
Pressure
Switches
-
Relief Valves
-
Rubber Hoses
-
Reserviors
-
Strainers
-
Stampings
-
Tanks
-
Trays for Parts
-
Valves of all
Types
-
Welding Torch
Bodies
|
Our Cleanrooms Ensure
Contamination-Free Manufacturing , Assembly,
Packaging, Cleaning, and Inspection
What is a Clean Room?
A work
area in which the air quality, temperature, and
humidity are highly regulated in order to
protect sensitive equipment from contamination.
Standards for the level of cleanliness of
cleanrooms are determined by the size (such as 0.5
µm) and number of particles in a cubic foot. A
clean room is rated as “Class 10,000" (or ISO
Class 7) where there exists no more than 10,000
particles larger than 0.5
µm in any cubic foot of
air; “Class 1,000” where there exists no more
than 1,000 particles. Clean rooms are important
in the production of silicon chips, hard disk
drives, and other technologies such as
satellites. Healthcare and diagnostic components
are areas of growing use of cleanroom services. ISO 14644-1 cleanroom standards table
Using state-of-the-art cleaning equipment in our
cleanrooms and controlled environments, Clean
Parts Group provides a wide range of cleaning
services: from heavy-duty degreasing to the
removal of microscopic particles and molecular
residues. Our uniquely flexible facility design
allows us to provide cost-effective cleaning
services for such a wide range of cleaning
requirements as well as for both small and large
volumes of parts.
-
Parts Cleaned Down to 2.0 Microns
-
Microscopic parts to Forklift Handling Sized
Parts Cleaning
-
We
Certify to Your Standard (See Specification
List Below)
-
Priority Handling Program
-
Minimum lot charge of $55.00
Industries Served
- Pharmaceutical
- Medical
- Medical Device
- Aerospace
- Military
- Biotechnology
- Petrochemical
- Cryogenic
|
- Electronic
- Automotive
- Scientific Instrument
- Pneumatics
- Government
- Semiconductor
- Telecommunications
|
Some of the 1,000
different specifications that we clean to:
ISO 14644 Class 1 to 9 Clean
Federal Standard 209 Class 1 to 500,000
Clean
ISO 4406
|
|
-
KLA
74-106348-00
-
FED
STD 209E
-
SAE
ARP 599A
-
ASTM F303-70
-
NAVWEPS OD-36797
-
Boeing D6-23380
-
KSC-C-123E
-
MIL-P-14232D
-
Chrysler SB-X17741
-
MSFC-ORM-422-8
-
Linde GS-38
-
MSFC-PROC-166C
-
MIL-STD-1246A
-
MSD-M
708-127b
-
Ford B 2X-1
-
FPS-Q-041199
-
AP
QCL-116F
-
Honeywell S-12387
-
CE
16599
-
ASTM F303-78
-
ASTM D5808-95
-
NAS
1638
-
AP
4WPI-SW70003
-
PSB
CP-4
-
BOC
399856
-
ASTM A632
-
TE
WZ96-500111-11
|
ISO 14644-1 Cleanroom
Standards
|
particle/m³³ |
|
Class |
0.1 µm |
0.2 µm |
0.3 µm |
0.5 µm |
1 µm |
5 µm |
|
ISO 1 |
10 |
2 |
|
|
|
|
|
ISO 2 |
100 |
24 |
10 |
4 |
|
|
|
ISO 3 |
1,000 |
237 |
102 |
35 |
8 |
|
|
ISO 4 |
10,000 |
2,370 |
1,020 |
352 |
83 |
|
|
ISO 5 |
100,000 |
23,700 |
10,200 |
3,520 |
832 |
29 |
|
ISO 6 |
1,000,000 |
237,000 |
102,000 |
35,200 |
8,320 |
293 |
|
ISO 7 |
|
|
|
352,000 |
83,200 |
2,930 |
|
ISO 8 |
|
|
|
3,520,000 |
832,000 |
29,300 |
|
ISO 9 |
|
|
|
35,200,000 |
8,320,000 |
293,000 |
Comparison of ISO 14644-1 with Federal Standard 209
Leaders in precision parts
cleaning, cleanroom services and sterilization
services to many recognized sterile, pyrogen
free, ultra-clean, super clean specifications.
Serving the pharmaceutical, semiconductor,
electronics, medical, automotive, and
aerospace/military markets.
|
